ANGEL CiTy – Tyre specific for sporty asian riders


The new ANGEL CiTy, the first tyre with an Italian soul and Pirelli sporting DNA, dedicated to Asian bikers

With the strength of Pirelli technology and experience, ANGEL CiTy is produced in the new Subang factory and has been developed to meet the needs of the Asian market, thanks to features such as high durability and resistance, safety in any conditions and sporty handling.

Subang (Indonesia), 21 October 2015 – Pirelli is proud to present the new ANGEL CiTy, the first tyre produced by the Italian brand in the new Indonesian factory of Subang, near the capital, Jakarta.


Pirelli has developed the new ANGEL CiTy above all for the requirements and habits of Asian bikers who mainly prefer sporting bikes up to 250cc, ‘underbones’ and other commuting bikes to get around the city, as well as for recreational use.

Thanks to features such as high durability and resistance, safety in any conditions and sporty handling, Pirelli’s goal for the new ANGEL CiTy is to increase the company’s presence in the Asian market in this segment. The tyre offers all of the best characteristics of two legendary tyres, the SPORT DEMON™ and the SPORT DRAGON™ in one single product, taking advantage of the latest developments and cutting-edge technology to meet the modern requirements of bikes and bikers.

ANGEL CiTy encapsulates the Italian soul and sporting nature of Pirelli, a prestigious and historic tyre manufacturer that has always been dedicated to technological development and motorsports. Pirelli is the exclusive supplier of tyres for the FIA Formula One World Championship® and the eni FIM Superbike World Championship, as well as its important commitments to the World Championships for Rally, Motocross and Endurance, and all the most important two- and four-wheel motorsport competitions. This role demonstrates the passion and dedication that Pirelli has always had for motorsports, which forms an important part of the DNA of this Italian company.


The Sport Touring Segment

The conventional Sport Touring tyre is the most widespread and common type of bike tyre in the world. The largest market for this segment is Asia, together with South America, but it has also shown steady growth in the West and Europe over the last few years.

Sturdiness, durability, grip on wet roads and consistent performance are the main aspects taken into consideration when selecting a tyre in this segment. This why the new ANGEL CiTy has been specially developed using the technology of the ANGEL™ GT as a starting point, the winner of multiple comparative tests, adjusting it for the conventional construction of bikes with engines up to 250cc.

The new Pirelli ANGEL CiTy was created with the intention of it becoming the benchmark tyre for this segment and the market leader for 250cc engine bikes.

Strengths of the ANGEL CiTy and advantages for bikers

The new ANGEL CiTy is the first line of Pirelli tyres developed in the new Subang factory in Indonesia. All the developments and technical solutions adopted in terms of profiles, structure, compounds and tread design were created with three main objectives in mind:

• High durability and resistance
• Safety under all conditions (e.g. wet and bumpy roads)
• Characteristic Pirelli handling

The new ANGEL CiTy represents state-of-the-art Pirelli technology for sporting bikes up to 250cc, including underbones and other commuting bikes.

Who ANGEL CiTy is intended for

ANGEL CiTy was designed for all those who use their bike the entire year, either to go to work and move easily through city traffic or for leisure and with a passenger. These are riders who need a tyre which can offer excellent mileage, top quality in terms of braking and versatility, as well as sturdiness, comfort and safety on wet roads.


The tread design of ANGEL CiTy:

The tread design of the new ANGEL CiTy has been developed following the wear-line principle to guarantee optimum wear and improve water dispersal. A break in the compound, or cut, that passes these lines at a right angle, reduces the formation of these wave lines, giving the advantage of more uniform wear and a reduction in the stress to which the compound is subjected. All of this translates into a direct benefit for the end user, who can count on a tyre with more uniform wear, therefore able to guarantee better mileage.

There are some substantial differences between the tread design of the front and rear tyres, even though the size is the same. The main difference regards the quantity and orientation of the cuts, a necessary decision due to the fact that the front and rear wheels face different types of stresses. The main function of the rear tyre is to transmit the power of the vehicle to the ground and guarantee grip during acceleration, while the front is responsible for steering, braking and water dispersal.

Some competitors offer tyres that can be fitted on either front or rear wheel, merely by inverting the direction of rotation. However, Pirelli’s experience has lead them to the conclusion that this type of solution has notable negative impacts on performance.

The tread design of the ANGEL CiTy represents the evolution of the ANGEL™ GT, adapted to the smaller width and the structure of the ANGEL CiTy. Pirelli has favoured a technical approach to maintain efficiency and performance. Some tyre manufacturers focus on developing tyres with a very attractive tread design, but Pirelli’s philosophy runs counter to this – aesthetics are important, but performance and safety must always take precedence.

The compounds used for the ANGEL CiTy

The new ANGEL CiTy uses an innovative compound, mainly based on carbon black with a calibrated percentage of silica, able to offer excellent grip on wet and dry surfaces, great tear resistance and high mileage. The advantages of carbon black derive from its ability to quickly get up to temperature, offering immediate traction in both dry and wet, while the silica components allow it to perform well in a wider range of temperatures and conditions. The ANGEL™ CiTy is therefore at home both on cold mornings and on hot afternoons, always able to offer high grip and an excellent feeling of safety in any riding conditions and on all road types.

The structure of the ANGEL CiTy

The new ANGEL CiTy has a nylon casing with excellent absorption properties and high resistance to stress and wear.

This is a well-known structure, widely used and tested in various applications. Its key characteristics are durability and resistance, as well as comfort and stability on all road types.
The advantages guaranteed by ANGEL CiTy can be clearly felt under all riding conditions but it is on rough roads that the qualities of this tyre are best appreciated. In fact, its robust construction guarantees high resistance to punctures and reliable performance throughout the entire life of the tyre.

Availability and sizes for ANGEL CiTy

The new ANGEL CiTy is available in a wide range of sizes able to satisfy the large majority of vehicles in the category to which it is dedicated, from underbone bikes to sporty bikes up to 250cc. Some sizes are already available for purchase, the rest will be available by the start of 2016.


NYX_1747 NYX_1761


Leave a Reply

  • (will not be published)

1Y0-A05 PDF BCP-211 Certification L50-501 Exam 050-895 IT-Exam TB0-104 PDF 1Z1-244 Exam-PDF PH0-180 Certification JN0-320 PDF 9L0-010 IT-Exam DC0-120 Certification A2040-405 IT-Exam GB0-283-ENGLISH IT-Exam 920-021 Study-Guide 3203 IT-Exam C-BOE-30 Certification HP0-891 Exam-PDF C_BOSUP_90 VCE HC-031-431-CHS Certification 640-875 Exam-PDF HP2-E23 Exam 000-766 Certification 0B0-104 Certification 9A0-087 Exam C2150-057 Exam-PDF HP2-H15 Certification C2090-545 Study-Guide 000-240 VCE C_BOE_30 VCE JN0-310 Exam-PDF EWDA101 Exam 050-SEPROGRC-01 PDF 9A0-082 Exam-PDF 500-202 Exam-PDF C2090-180 Certification 250-311 VCE 000-274 Exam-PDF P2065-016 IT-Exam 1z0-813 Exam-PDF E22-128 Study-Guide 000-904 Dumps CAT-340 Exam P2090-075 Certification HP0-M99 Study-Guide C2170-006 Dumps 70-630 PDF 70-410 IT-Exam 9A0-385 VCE C2010-534 VCE 000-448 Dumps P_PRO_65 Exam-PDF